Category: Submersible Water Pumps

9372 Wacker PS 3 1500 3in Submersible Water Pump 110V or 220V by

9372 Wacker PS 3 1500 3in Submersible Water Pump 110V or 220V
Check Price for 9372 Wacker PS 3 1500 3in Submersible Water Pump 110V or 220V

Wacker PS3 1500 Submersible Water Pumps
Single Phase 110 or 220 Volts

Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.

Features and benefits

  • Lightweight, compact design for easy transport and positioning of pump.
  • Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
  • Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
  • Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
  • Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
  • Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
  • Semi-vortex impeller allows for optimum wear resistance.

Technical features

    Description Metric Inch
    Discharge diameter 80 mm 3 in
    Length x width x height 240 x 240 x 570 mm 9.5 x 9.5 x 22.5 in
    Operating weight 28,8 kg 63.5 lb
    Max. head 21 m 69 ft
    Max. discharge 420 l/min 111 US gpm
    Max. pressure 2,07 bar 30 psi
    Solid size capacity 8,5 mm 0.3 in
    Motor type Single phase/60 Hz
    Voltage 110 or 220 V 110 or 220 V
    Current (full load/start @ 110V) 23,0/136 A 23.0/136 A
    Speed 3.440 1/min 3,440 rpm
    Max. power output 1,5 kW 2 hp
    Cable length 10 m 32 ft
    Cable size 3,31 mm2 12 AWG
    Impeller material Ductile iron
    Impeller type Semi-vortex

    .

9360 Wacker Hose & 3in Accessories For Pumps by

9360 Wacker Hose & 3in Accessories For Pumps
Check Price for 9360 Wacker Hose & 3in Accessories For Pumps

Wacker suction and discharge hose for water and mild liquids

  • 3″ Flexible Suction Hose
    • Lightweight PVC suction hose for industrial & construction use. It is also well suited to outdoor service.
    • It is more economical & much lighter than similar rubber hoses, & has a smooth bore.
    • 20ft hose
  • 3″ Flexible Discharge Hose
    • Lay-flat PVC hose resists kinking & twisting.
    • Strong & economical, It is designed as a standard duty hose for water discharge in industrial & construction applications.
    • It rolls up flat for easy storage.
    • Reinforcement includes spiral plies & longitudinal synthetic cords for excellent burst resistance.
    • 50ft or 100ft length available

    Cam-lock fittings also known as cam and groove couplings

  • The hose needs a T-bolt clamp to attach to all couplings.
    • Clamp, 3-7/16″ T-bolt – Hose clamp is used for securing both male & female threaded connectors as well as quick disconnect onto 3″ diameter suction & discharge hoses. Accessory: 0028699
    • Female Threaed Coupling, 76mm/3in – Female threaded NPT coupling with 3″ hose barb. Accessory: 0028071
    • Strainer 3″ Hose Coupling – Male threaded stud for metal suction strainer with 3″ hose barb to suction hose. Accessory: 0028072
    • Metal Suction Strainer – Accessory: 0028508
    • Male Quick Disconnect – Female threaded NPT with male quick disconnect coupling. Use with female quick disconnect. Accessory: 0051450
    • Female Quick Disconnect – 3″ hose barb with female quick disconnect. Accessory: 0051453
    • Hose Quick Disconnect – Male quick disconnect with 3″ hose barb. Use with female quick disconnect. Accessory: 0070340

    .

    9357 Wacker Hose & 2in Accessories For Pumps by

    9357 Wacker Hose & 2in Accessories For Pumps
    Check Price for 9357 Wacker Hose & 2in Accessories For Pumps

    Wacker 2″ suction & discharge hose for water & mild liquids

    Flexible Suction Hose

    • Lightweight PVC suction hose for industrial & construction use. It is also well suited to outdoor service.
    • It is more economical & much lighter than similar rubber hoses, & has a smooth bore.
    • 20ft hose

    Flexible Discharge Hose

    • Lay-flat PVC hose resists kinking & twisting.
    • Strong & economical, It is designed as a standard duty hose for water discharge in industrial & construction applications.
    • It rolls up flat for easy storage.
    • Reinforcement includes spiral plies & longitudinal synthetic cords for excellent burst resistance.
    • 50ft or 100ft length available

    Cam-lock fittings also known as cam & groove couplings

  • The hose needs a T-bolt clamp to attach to all couplings.
    • Clamp, 2-3/8″ T-bolt – Hose clamp is used for securing both male & female threaded connectors as well as quick disconnectors onto 2-inch diameter suction & discharge hoses. Accessory: 0028698
    • Coupling, 50mm/2″ – Female threaded NPT coupling with 2″ hose barb. Accessory: 0026690
    • Metal Suction Strainer – Accessory: 0028507
    • Strainer 2″ Hose Coupling – Male threaded stud for metal suction strainer with 2″ hose barb to suction hose. Accessory: 0026918
    • Male Quick Disconnect – Female threaded NPT with male quick disconnect coupling. Use with female quick disconnect. Accessory: 0051449
    • Female Quick Disconnect – 2″ hose barb with female quick disconnect. Accessory: 0051452
    • Hose Quick Disconnect – Male quick disconnect with 2″ hose barb. Use with female quick disconnect. Accessory: 0070339

    .

    9368 Wacker PSA 2 500 2in Submersible Pump 110V Automatic Switch by Wacker Corporation

    9368 Wacker PSA 2 500 2in Submersible Pump 110V Automatic Switch
    Check Price for 9368 Wacker PSA 2 500 2in Submersible Pump 110V Automatic Switch

    Wacker PSA 2 500 2in Submersible Pump 110V/60Hz
    Automatic Switch

    Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
    Built for the demands of construction, mining, municipality and farm applications.

    Features and benefits

    • Lightweight, compact design for easy transport and positioning of pump.
    • Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
    • Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
    • Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
    • Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
    • Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
    • Semi-vortex impeller allows for optimum wear resistance.

    Technical features

      Description Metric Inch
      Discharge diameter 50 mm 2 in
      Length x width x height 220 x 185 x 305 mm 8.7 x 7.3 x 12 in
      Operating weight 10,0 kg 22 lb
      Max. head 12 m 39.5 ft
      Max. discharge 236 l/min 62.4 US gpm
      Max. pressure 1,17 bar 17 psi
      Solid size capacity 6,0 mm 0.2 in
      Motor type Single phase/60 Hz
      Voltage 110 V 110 V
      Current (full load/start @ 110V) 6,1/12,5 A 6.1/12.5 A
      Speed 3.270 1/min 3,270 rpm
      Max. power output 0,48 kW 2/3 hp
      Cable length 10 m 32 ft
      Cable size 1,31 mm2 16 AWG
      Impeller material Urethane rubber
      Impeller type Semi-vortex

      .

    9370 Wacker PS3 5503 3in Submersible Pump 220V 3 Phase by Wacker Corporation

    9370 Wacker PS3 5503 3in Submersible Pump 220V 3 Phase
    Check Price for 9370 Wacker PS3 5503 3in Submersible Pump 220V 3 Phase

    Wacker PS 3 5503 3in Submersible Pump 220V/60Hz

    Lightweight, portable, Three phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications.

    Features and benefits

    • Lightweight, compact design for easy transport and positioning of pump.
    • Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
    • Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
    • Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
    • Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
    • Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
    • Semi-vortex impeller allows for optimum wear resistence.

    Technical features

      Description Metric Inch
      Discharge diameter 80 mm 3 in
      Length x width x height 305 x 260 x 655 mm 12.1 x 10.2 x 25.7 in
      Operating weight 66 kg 146 lb
      Max. head 38,0 m 125 ft
      Max. discharge 985 l/min 260 US gpm
      Max. pressure 3,72 bar 54 psi
      Solid size capacity 8,5 mm 0,3 in
      Motor type Three Phase / 60 Hz
      Voltage 220 V 220 V
      Current (full load/start @ 220V) 19,5/162,0 A 19.5/162.0 A
      Speed 3.430 1/min 3,430 rpm
      Max. power output 5,5 kW 7.5 hp
      Cable length 15 m 50 ft
      Cable size 3,31 mm2 12 AWG

      .

    9373 Wacker PS 3 2200 3in Submersible Pump 220V by Wacker Corporation

    9373 Wacker PS 3 2200 3in Submersible Pump 220V
    Check Price for 9373 Wacker PS 3 2200 3in Submersible Pump 220V

    Wacker PS 3 2200 3in Submersible Pump
    Single Phase 220V/60Hz

    Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
    Built for the demands of construction, mining, municipality and farm applications.

    Features and benefits

    • Lightweight, compact design for easy transport and positioning of pump.
    • Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
    • Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
    • Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
    • Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
    • Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
    • Semi-vortex impeller allows for optimum wear resistance.

    Technical features

      Description Metric Inch
      Discharge diameter 80 mm 3 in
      Length x width x height 240 x 240 x 570 mm 9.5 x 9.5 x 22.5 in
      Operating weight 29,0 kg 64 lb
      Max. head 26 m 85 ft
      Max. discharge 493 l/min 130 US gpm
      Max. pressure 2,55 bar 37 psi
      Solid size capacity 8,5 mm 0.3 in
      Motor type Single phase/60 Hz
      Voltage 220 V 220 V
      Current (full load/start @ 220V) 13,0/70,0 A 13/70 A
      Speed 3.465 1/min 3,465 rpm
      Max. power output 2,2 kW 3 hp
      Cable length 10 m 32 ft
      Cable size 2,08 mm2 14 AWG
      Impeller material Ductile iron
      Impeller type Semi-vortex

      .

    9375 Multiquip SS233 2in Submersible Pump 110V by Multiquip

    9375 Multiquip SS233 2in Submersible Pump 110V
    Check Price for 9375 Multiquip SS233 2in Submersible Pump 110V

    Multiquip SS233 2in Submersible Pump 110V

    Multiquip’s lightweight, compact submersible pumps are the first choice for household dewatering applications such as basements and swimming pools.

    Features and benefits

    • Built-in overload protection protects the motor from overheating
    • Clean-up is easy with the removable screened bottom
    • 1/2 HP, 115V, single phase, 6.0 Amp motor

    Technical features

      Multiquip Water Pump
      SS233
      Gallons Per Minute (GPM)
      60 gpm
      Outlet Size (in)
      2 in.
      Inlet Size (in)
      2 in.
      Impeller Disc Size
      2 in.
      Max Head (ft)
      20 ft
      Voltage
      110 Volts
      Starting Amperage
      30 Amps
      Running Amperage
      6 Amps
      Cable Length
      20 ft
      Overall Height
      14.5 in.
      Pump Diameter
      7.25 in.
      Weight (lb)
      15.5

      .

    9376 Multiquip ST2037 2in Submersible Pump 110V by Multiquip

    9376 Multiquip ST2037 2in Submersible Pump 110V
    Check Price for 9376 Multiquip ST2037 2in Submersible Pump 110V

    Multiquip ST2037 2in Submersible Pump 110V

    Multiquip’s lightweight, compact submersible pumps are the first choice for household dewatering applications such as basements and swimming pools.

    Features and benefits

    • Durable die cast aluminum casing cover.
    • Moves up to 73 gallons (276 liters) per minute
    • Replaceable discharge threads.
    • Maximum head of 37 feet (11.3 meters)
    • Automatic thermo-overload protection.
    • Double mechanical oil-filled seal.

    Technical features

      Multiquip Water Pump
      ST2037
      Gallons Per Minute (GPM)
      73 gpm
      Outlet Size (in)
      2 in.
      Inlet Size (in)
      2 in.
      Impeller Disc Size
      2 in.
      Max Head (ft)
      37 ft
      Voltage
      110 Volts
      Starting Amperage
      34.5 Amps
      Running Amperage
      6.9 Amps
      Cable Length
      50 ft
      Overall Height
      15.5 in.
      Pump Diameter
      7.4 in.
      Weight (lb)
      31

      .

    9377 Multiquip ST2047 2in Submersible Pump 110V by Multiquip

    9377 Multiquip ST2047 2in Submersible Pump 110V
    Check Price for 9377 Multiquip ST2047 2in Submersible Pump 110V

    Multiquip ST2047 2in Submersible Pump 110V

    It’s portable, lightweight and reliable.
    Multiquip’s ST2047 also has improved impeller-wear making it the perfect choice for applications with sandy water and higher heads.

    Features and benefits

    • Double mechanical oil-filled seal minimizes chances of motor damage.
    • Maximum head of 47 feet (14.3 meters).
    • Total weight of 33 pounds (15 kg)
    • Automatic thermo-overload protection.
    • Top flow of 87 gallons (329 liters) a minute.

    Technical features

      Multiquip Water Pump
      ST2037
      Gallons Per Minute (GPM)
      87 gpm
      Outlet Size (in)
      2 in.
      Inlet Size (in)
      2 in.
      Impeller Disc Size
      2 in.
      Max Head (ft)
      47 ft
      Voltage
      110 Volts
      Starting Amperage
      34.5 Amps
      Running Amperage
      6.9 Amps
      Cable Length
      50 ft
      Overall Height
      15.4 in.
      Pump Diameter
      7.4 in.
      Weight (lb)
      33

      .

    9378 Multiquip YELLSUB Submersible Pump 110V by Multiquip

    9378 Multiquip YELLSUB Submersible Pump 110V
    Check Price for 9378 Multiquip YELLSUB Submersible Pump 110V

    Multiquip YELL SUB
    Multiquip’s lightweight, compact submersible pumps are the first choice for household dewatering applications such as basements and swimming pools.

    Features and benefits

    • Built-in overload protection protects the motor from overheating
    • Clean-up is easy with the removable screened bottom.
    • Maximum head of 20 feet (6.1 meters).
    • Total weight of 6 pounds (2.8 kg)
    • Top flow of 22 gallons (83 liters) a minute.

    Technical features

      Multiquip Water Pump
      YELLSUB
      Gallons Per Minute (GPM)
      22 gpm
      Outlet Size (in)
      1.25 in.
      Inlet Size (in)
      1.25 in.
      Impeller Disc Size
      1.25 in.
      Max Head (ft)
      20 ft
      Voltage
      110 Volts
      Starting Amperage
      11.5 Amps
      Running Amperage
      2.3 Amps
      Cable Length
      9 ft
      Overall Height
      9.5 in.
      Pump Diameter
      5.375 in.
      Weight (lb)
      6

      .

    Recent Entries »