Best Door Tools Store - Page 9 of 239 - Best Fire Rated and General Access Doors - Explore Panels for Drywall, Ceiling, Floor & Roof

24″ x 24″ Lightweight Aluminum Access Door – BEST

24″ x 24″ Lightweight Aluminum Access Door The Best Access BA-LT-4000 is a lightweight aluminum access door for walls and ceilings. With a durable design and lightweight components, access to large openings in walls and ceilings is made easy. The mitered aluminum frame provides an architecturally pleasing appearance. The aluminum door panel is lined with 3/4″ polystyrene insulation. The all aluminum construction of the BA-LT-4000 is ideal for exterior applications, and also those specific interior applications where corrosion or moisture is a concern. Gasketing between the door and frame is provided to insure an airtight fit. – Application – Lightweight aluminum access door for walls and ceilings Product Features – Mitered aluminum frame provides an architecturally pleasing appearance- Aluminum door panel is lined with 3/4″ polystyrene insulation- All aluminum construction is ideal for exterior applications, also speciï¬c interior applications where corrosion or moisture is a concern- Gasketing between the door and frame BA-LT-4000 Access Door Speciï¬cations: – Door / Door Frame: Aluminum: .064 door and .080 frame Flush to edge of frame, 1-5/16″ mitered aluminum extrusion ï¬‚ange with 1-1/2″ deep mounting frame- Hinge: Doors with width 24″ or less to have concealed pin hinge. Doors with width over 24″ to have continuous aluminum piano hinge with exposed knuckle, set to open to 180 degrees.- Insulation: 3/4″ Type 3 Expanded Polystyrene (EPS) Foil Lined Insulation, with a 3.18 R Value.- Gasket: 1/8″ x 3/8″ closed cell neoprene gasketing- Standard Latch: Screwdriver operated cam latch- Finish: Mill ï¬nish.

Posted in Exterior Doors

7″ x 7″ Grease Duct Access Panel – BEST

7″ x 7″ Grease Duct Access Panel The BA-GDD is a UL and ULC listed access door for installation into grease ducts. The 16 gage steel construction along with the high temperature resistant gasket and sealant allows this door to be grease tight and airtight. This door meets or exceeds requirements of all mechanical codes. – Application – Access door for installation in Kitchen Exhaust Systems- This door meets or exceeds requirements of all mechanical codes Product Features – Bolt in unit easily installed into existing ductwork- Duct cutout template included- No bolts penetrate to the interior of the duct- Two handles for easy removal and installation- 16 Gage galvanized steel- N.F.P.A. #96.

Posted in Fire-Rated Doors

20″ x 24″ Plastered Wall Access Doors – BEST

20″ x 24″ Plastered Wall Access Doors BA-PW series Access Doors are designed specifically to meet the needs of plaster construction. Door has 3/4″ plaster ground for plaster finish. Door: 20″ wide x 24″ high Rough Opening Size: 20 1/4″ wide x 24 1/4″ high Material: 16 gauge steel door & frame Lock/Latch: Screwdriver Operated Cam Latch Flange: Includes 1/4″ mounting holes to facilitate installation. Hinge: Concealed pivot rod Finish: Prime coat suitable for painting.

Posted in Plaster Doors

18″ x 24″ Plastered Wall Access Doors – BEST

18″ x 24″ Plastered Wall Access Doors BA-PW series Access Doors are designed specifically to meet the needs of plaster construction. Door has 3/4″ plaster ground for plaster finish. Door: 18″ wide x 24″ high Rough Opening Size: 18 1/4″ wide x 24 1/4″ high Material: 16 gauge steel door & frame Lock/Latch: Screwdriver Operated Cam Latch Flange: Includes 1/4″ mounting holes to facilitate installation. Hinge: Concealed pivot rod Finish: Prime coat suitable for painting.

Posted in Plaster Doors

18″ x 18″ Plastered Wall Access Doors – BEST

18″ x 18″ Plastered Wall Access Doors BA-PW series Access Doors are designed specifically to meet the needs of plaster construction. Door has 3/4″ plaster ground for plaster finish. Door: 18″ wide x 18″ high Rough Opening Size: 18 1/4″ wide x 18 1/4″ high Material: 16 gauge steel door & frame Lock/Latch: Screwdriver Operated Cam Latch Flange: Includes 1/4″ mounting holes to facilitate installation. Hinge: Concealed pivot rod Finish: Prime coat suitable for painting.

Posted in Plaster Doors

16″ x 20″ Plastered Wall Access Doors – BEST

16″ x 20″ Plastered Wall Access Doors BA-PW series Access Doors are designed specifically to meet the needs of plaster construction. Door has 3/4″ plaster ground for plaster finish. Door: 16″ wide x 20″ high Rough Opening Size: 16 1/4″ wide x 20 1/4″ high Material: 16 gauge steel door & frame Lock/Latch: Screwdriver Operated Cam Latch Flange: Includes 1/4″ mounting holes to facilitate installation. Hinge: Concealed pivot rod Finish: Prime coat suitable for painting.

Posted in Plaster Doors

24″ x 24″ Floor Door, Channel Frame, H20 Loading – BEST

24″ x 24″ Floor Door, Channel Frame, H20 Loading The Best Access Doors Ba-FC Series aluminum floor access doors are designed for interior and exterior applications where watertightness is required. The channel frame construction with 1 1/2″ drainage coupling and integral anchor flange is designed to be cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip – Application – Designed for interior and exterior applications where watertightness is required Product Features – Channel frame construction with 1 1/2″ drainage coupling and integral anchor ï¬‚ange is designed to be cast into concrete- Diamond plate door panel is equipped with a ï¬‚ush aluminum drop handle and an automatic hold open arm- Designed for oï¬€-street locations that may occasionally receive AASHTO H-20-44 wheel loads BA-FC-H20 Floor Door Speciï¬cations: – Material: Aluminum door and frame; stainless steel hinges and hardware- Door: 1/4″ aluminum diamond plate reinforced to meet AASHTO speciï¬cation H20-44 for traï¬ƒc loading (16000 lb. wheel load with 30% added for impact)- Frame: Channel frame fabricated from aluminum extrusion with 1 1/2″ drainage coupling and integral 1″ anchor ï¬‚ange- Hinge: Stainless steel butt hinges with tamperproof stainless steel bolts and nuts- Opening Device: Automatic hold open arm with red vinyl grip allows door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. When required, stainless steel compression springs can be provided to add lift assistance.- Standard Latch: Flush aluminum drop handle with stainless steel slamlock- Finish: Mill ï¬nish, with optional bituminous coating on exterior of frame.

Posted in Floor Doors

14″ x 14″ Fire Rated Insulated Access Door with Flange – BEST

14″ x 14″ Fire Rated Insulated Recessed Door with Flange The BA-FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour “B” label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24″ x 36″) – Application: – For all types of walls and ceilings- This door should be used in walls when temperature rise or heat transmission is a factor. Product Features – Insulated door panel – Concealed hinge – Self-closing – Self-Latching- Inside latch release BA-FB-5050 Access Door Specifications: – Door / Door Frame: Steel 20 gage door,16 gage mounting frame Door filled with 2″ thick fire rated insulation, flange to be 1″ wideHinge: Concealed- Fire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label Max size: 36 x 48. (Ceilings): Warnock Hersey International 3 hour rated in a non-combustible ceiling. 1 hour rated in a combustible ceiling. Max size: 24 x 36 – Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for mortise cylinder locks.- Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked-on enamel.

Posted in Fire-Rated Doors

12″ Circular Gypsum Access Panel – BEST

Compliment any design by using our Round Stealth Access Panel. The innovative round Stealth Access Panel is made of GFRG (glass fiber reinforced gypsum). They are designed to blend seamlessly into a drywall ceiling when circular light fixtures, speakers, or smoke detectors are being used to maintain the aesthetic theme in the design. Size: Access Opening- 12″ diameter Rough Opening – 18″ x 18″ General Installation Instructions Download General Gypsum Panel Installation instructions Material: Glass fiber reinforced gypsum Shell thickness: 5/8″ lightweiht gypsum Edge thickness: The panel has an edge thickness to accomodate 5/8″ drywall Finish: White Tapered edge for tape joint Easily textured Lightweight Blends into surrounding drywall Concealed hinge No shrinking or cracking Single trade installation Pre-spotted fastener holes Reduce labor costs.

Posted in Ceiling Doors

Access Door BA-SFM 8 x 8 Surface Mounted with Flange – BEST

8″ x 8″ Surface Mounted Access Door with Flange. BA-SFM access Panel does not require any framing or cutting of inner wall obstructions. It is designed to sit directly on the wall and can be installed easily with fasteners on the 4 corners.BA-SFM GSurface Mounted Access Door specifications Submittal Sheet – Material: 16 gauge cold rolled steel Hinge: Continuous piano hinge Lock / latch: Screwdriver operated cam latch Finish: DuPont high quality white powder coat.

Posted in Surface-Mounted Doors