Best Door Tools Store - Page 7 of 239 - Best Fire Rated and General Access Doors - Explore Panels for Drywall, Ceiling, Floor & Roof

8″ x 8″ Flush Plastic Access Door – BEST

8″ x 8″ Flush Non-Rated Plastic Access Door The Best Access Doors BA-PA-3000 Plastic Access Door is designed to provide easy access to walls and ceilings. The high impact styrene plastic with U.V. stabilizers will not fade or corrode. The door is completely removable from the frame and fits tightly with snap latches. The white finish, with textured exposed surfaces, can be left as is or painted to match the surrounding areas. This door is easy to install by applying caulking adhesive to the back of the frame and pressing into place. – Application – Easy access to walls and ceilings- Economical and attractive Product Features – High impact styrene plastic with U.V. stabilizers- Hinged with a removable feature BA-PA-3000 Access Door Speciï¬cations: – Door / Door Frame: 1/8″ high impact styrene plastic with U.V. stabilizers Flush to frame — rounded safety corners, one piece outside ï¬‚ange with 3/4″ deep mounting frame- Standard Latch: Snap latches allow door to ï¬t tightly within frame- Door Hinge: Concealed- Finish: White, with textured exposed surfaces.

Posted in Plastic Doors

.6″ x 9″ Flush Plastic Access Door – BEST

6″ x 9″ Flush Non-Rated Plastic Access Door The Best Access Doors BA-PA-3000 Plastic Access Door is designed to provide easy access to walls and ceilings. The high impact styrene plastic with U.V. stabilizers will not fade or corrode. The door is completely removable from the frame and fits tightly with snap latches. The white finish, with textured exposed surfaces, can be left as is or painted to match the surrounding areas. This door is easy to install by applying caulking adhesive to the back of the frame and pressing into place. – Application – Easy access to walls and ceilings- Economical and attractive Product Features – High impact styrene plastic with U.V. stabilizers- Hinged with a removable feature BA-PA-3000 Access Door Speciï¬cations: – Door / Door Frame: 1/8″ high impact styrene plastic with U.V. stabilizers Flush to frame — rounded safety corners, one piece outside ï¬‚ange with 3/4″ deep mounting frame- Standard Latch: Snap latches allow door to ï¬t tightly within frame- Door Hinge: Concealed- Finish: White, with textured exposed surfaces.

Posted in Plastic Doors

10″ x 10″ Weather Strip Removable Access Door – BEST

10″ x 10″ Weather Strip Removable Access Doors BA-WSR series Access Doors are designed with flush gaskets between the panel and frame to ensure flush air seal in all types of walls and ceilings. Note: Door has NOT been tested for air tightness. BA-WSR Aluminum Drop-In Ceiling Door Specifications Door: 10″ wide x 10″ high Rough Opening Size: 10 1/2″ wide x 10 1/2″ high Material: 16 gauge galvanneal steel Lock/Latch: Screwdriver Operated Cam Latch Flange: 1″ flange Hinge: Concealed Finish: Prime coat suitable for painting.

Posted in Exterior Doors

24″ x 48″ Aluminum Drop-in Ceiling Door – BEST

24″ x 48″ Aluminum Drop-in Ceiling Door This unique access door comes in a white baked enamel finish and features a hasslefree installation. It simply drops into the T-Bar ceiling with ease. Includes mounting screws for safe and secure installation. BA-TB-1210 Aluminum Drop-In Ceiling Door Specifications Door: 24″ wide x 48″ high Rough Opening Size: 23 ¾” wide x 27 ¾” high Material: 16 gauge steel door & frame Lock/Latch: 5 x Flush stainless steel cams Flange: N/A Hinge: Continuous piano hinge. Allows opening to 180 degree. Finish: White baked enamel coat.

Posted in Ceiling Doors

24″ x 24″ Aluminum Drop-in Ceiling Door – BEST

24″ x 24″ Aluminum Drop-in Ceiling Door This unique access door comes in a white baked enamel finish and features a hasslefree installation. It simply drops into the T-Bar ceiling with ease. Includes mounting screws for safe and secure installation. BA-TB-1210 Aluminum Drop-In Ceiling Door Specifications Door: 24″ wide x 24″ high Rough Opening Size: 23 ¾” wide x 23 ¾” high Material: 16 gauge steel door & frame Lock/Latch: 4 x Flush stainless steel cams Flange: N/A Hinge: Continuous piano hinge. Allows opening to 180 degree. Finish: White baked enamel coat.

Posted in Ceiling Doors

24″ x 36″ Floor Door H20 Loading – BEST

24″ x 24″ Floor Door H20 Loading The Best Acces Door BA-FA-H20 series aluminum floor access doors are designed for interior and exterior applications where watertightness is not required. The angle frame construction with integral anchor flange is designed to be cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip. – Application – Designed for interior and exterior applications where watertightness is not required Product Features – Angle frame construction with integral anchor ï¬‚ange is designed to be cast into concrete- Diamond plate door panel is equipped with a ï¬‚ush aluminum drop handle and an automatic hold open arm, along with st/stl compression spring & st/stl slamlock- Designed for oï¬€-street locations that may occasionally receive AASHTO H-20-44 wheel loads BA-FA-H20 Floor Door Speciï¬cations: – Material: Aluminum door and frame; stainless steel hinges and hardware- Door: 1/4″ aluminum diamond plate reinforced to meet AASHTO speciï¬cation – H20-44 for traï¬ƒc loading (16000 lb. wheel load with 30% added for impact)- Hinge: Stainless steel butt hinges with tamperproof stainless steel bolts and nuts- Frame: Angle frame fabricated from aluminum extrusion with an integral 1″ anchor ï¬‚ange- Opening Device: Automatic hold open arm with red vinyl grip allows door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. Stainless steel compression springs are provided to add lift assistance.- Standard Latch: Flush aluminum drop handle with st/stl slamlock- Finish: Mill ï¬nish, with optional bituminous coating on exterior of frame.

Posted in Floor Doors

24″ x 24″ Fire Rated Un-Insulated Access Door with Flange – BEST

24″ x 24″ Fire Rated Un-Insulated Access Door with Flange Approved by Underwriters Laboratories (UL) for 1 Â½ hours â€œBâ€ label in walls and ULC for 2 hours â€œBâ€ label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor. Â In-Stock and Ready to Ship ! Â Â Download Technical Data / Submittal Sheet (BA-FB-5060) Â Application: â€¢ Designed to provide access in walls, while maintaining an invisible, architecturally pleasing appearance Product Features Â Product Features â€¢ Concealed hinge â€¢ Self-closing â€¢ Self-Latchingâ€¢ Inside latch releaseÂ BA-FB-5060 Access Door Specifications: Door / Door Frame: Steel 16 gage door, 16 gage mounting frame. Flush to frame with reinforced edges, flange to be 1″ wideHinge: ConcealedFire Rating (Walls): UL â€” 1-1/2 hour “B” label. ULC â€” 2 hour “B” label. (optional)Max size 36 x 48Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.Finish: Steel: 5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel. Â.

Posted in Fire-Rated Doors

24″ x 24″ Acoustical Plaster Recessed Access Door – BEST

24″ x 24″ Acoustical Recessed Access Door The Best Access Doors BA-AP-5010 recessed access door is designed for use in acoustical plaster walls and ceilings. The door is recessed 5/8″ and is lined with self-furring lath. An expansion casing bead with 3″ wide galvanized lath, included as part of the frame, provides a clean, tight finish between the frame and plaster and also adds reinforcement. – Application – Designed for use in acoustical plaster walls and ceilings Product Features – Door is recessed 5/8″ and is lined with self-furring lath- Expansion casing bead with 3″ wide galvanized lath BA-AP-5010 Access Door Speciï¬cations: – Material: Steel: 16 gage door, 14 gage mounting frame- Door: Recessed 5/8″ and lined with self-furring galvanized lath- Door Frame: Expansion casing bead with 3″ wide galvanized lath, recessed 3/4″ to receive plaster- Hinge: Concealed, pivoting rod type. (For wall applications, a continuous exposed piano hinge is suggested.)- Standard Latch: Flush to surface, screwdriver operated cam latch- Optional Latches/Locks: Cylinder lock and key, allen head cam latch, spanner head cam latch- Finish: Steel: 5-stage iron phosphate preparation with prime coat of White alkyd baked-on ename.

Posted in Plaster Doors

8″ x 8″ Plastered Wall Access Doors – BEST

8″ x 8″ Plastered Wall Access Doors BA-PW series Access Doors are designed specifically to meet the needs of plaster construction. Door has 3/4″ plaster ground for plaster finish. BA-PW Plastered Wall Door Specifications Door: 8″ wide x 8″ high Rough Opening Size: 8 1/4″ wide x 8 1/4″ high Material: 16 gauge steel door & frame Lock/Latch: Screwdriver Operated Cam Latch Flange: Includes 1/4″ mounting holes to facilitate installation. Hinge: Concealed pivot rod Finish: Prime coat suitable for painting.

Posted in Plaster Doors

8″ x 12″ Plastered Wall Access Doors – BEST

8″ x 12″ Plastered Wall Access Doors BA-PW series Access Doors are designed specifically to meet the needs of plaster construction. Door has 3/4″ plaster ground for plaster finish. Door: 8″ wide x 12″ high Rough Opening Size: 8 1/4″ wide x 12 1/4″ high Material: 16 gauge steel door & frame Lock/Latch: Screwdriver Operated Cam Latch Flange: Includes 1/4″ mounting holes to facilitate installation. Hinge: Concealed pivot rod Finish: Prime coat suitable for painting.

Posted in Plaster Doors