12″ x 12″ Flush Plastic Access Door – BEST

12
Check Price for 12

12″ x 12″ Flush Non-Rated Plastic Access Door The Best Access Doors BA-PA-3000 Plastic Access Door is designed to provide easy access to walls and ceilings. The high impact styrene plastic with U.V. stabilizers will not fade or corrode. The door is completely removable from the frame and fits tightly with snap latches. The white finish, with textured exposed surfaces, can be left as is or painted to match the surrounding areas. This door is easy to install by applying caulking adhesive to the back of the frame and pressing into place. – Application – Easy access to walls and ceilings- Economical and attractive Product Features – High impact styrene plastic with U.V. stabilizers- Hinged with a removable feature BA-PA-3000 Access Door Specifications: – Door / Door Frame: 1/8″ high impact styrene plastic with U.V. stabilizers Flush to frame — rounded safety corners, one piece outside flange with 3/4″ deep mounting frame- Standard Latch: Snap latches allow door to fit tightly within frame- Door Hinge: Concealed- Finish: White, with textured exposed surfaces.

18″ x 18″ Drywall Inlay Access Panel for Masonry applications – BEST

18
Check Price for 18

18″ x 18″ Drywall Inlay Access Panel for masonry applications BA-MW – Aluminum frame, with drywall inlay, for masonry applications The access panel consists of a welded aluminum frame and is available with or without drywall inlay of 1 2″ (12.7 mm) or 5 8″ (15.9 mm) and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process for sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 6 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed to be recessed into concrete wall systems. This panel comes with predrilled holes for easy installation. http: www.bestaccessdoors.com content BA-MW.pdf (BA-MW) Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

16″ x 16″ Drywall Inlay Access Panel for Masonry applications – BEST

16
Check Price for 16

16″ x 16″ Drywall Inlay Access Panel for masonry applications BA-MW – Aluminum frame, with drywall inlay, for masonry applications The access panel consists of a welded aluminum frame and is available with or without drywall inlay of 1 2″ (12.7 mm) or 5 8″ (15.9 mm) and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process for sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 6 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed to be recessed into concrete wall systems. This panel comes with predrilled holes for easy installation. http: www.bestaccessdoors.com content BA-MW.pdf (BA-MW) Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

12″ x 12″ Drywall Inlay Access Panel for Masonry applications – BEST

12
Check Price for 12

12″ x 12″ Drywall Inlay Access Panel for masonry applications BA-MW – Aluminum frame, with drywall inlay, for masonry applications The access panel consists of a welded aluminum frame and is available with or without drywall inlay of 1 2″ (12.7 mm) or 5 8″ (15.9 mm) and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process for sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 6 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed to be recessed into concrete wall systems. This panel comes with predrilled holes for easy installation. http: www.bestaccessdoors.com content BA-MW.pdf (BA-MW) Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

18″ x 18″ Fire Rated Insulated Access Door with Flange – BEST

18
Check Price for 18

18″ x 18″ Fire Rated Insulated Recessed Door with Flange The BA-FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour “B” label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24″ x 36″) – Application: – For all types of walls and ceilings- This door should be used in walls when temperature rise or heat transmission is a factor. Product Features – Insulated door panel – Concealed hinge – Self-closing – Self-Latching- Inside latch release BA-FB-5050 Access Door Specifications: – Door / Door Frame: Steel 20 gage door,16 gage mounting frame Door filled with 2″ thick fire rated insulation, flange to be 1″ wideHinge: Concealed- Fire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label Max size: 36 x 48. (Ceilings): Warnock Hersey International 3 hour rated in a non-combustible ceiling. 1 hour rated in a combustible ceiling. Max size: 24 x 36 – Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for mortise cylinder locks.- Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked-on enamel.

8″ x 8″ Drywall Inlay Access Panel for Exterior Facade – BEST

8
Check Price for 8

8″ x 8″ Drywall Inlay Access Panel for Exterior Facade BA-MPL – Access panel for stucco The access panel consists of aluminum profiles, a sheet steel insert with expanded metal and a round cylinder lock with key. Both, an outer and an inner frame of the access panel consist of four single frames, which are firmly connected due to a special welding process. The access panel is equipped with a safety-system against accidental opening. In order to avoid accidents, this safety-system has to be secured after each opening. A joint gap of 3 mm is visible between outer frame and door leaf, which is equipped with an innovative brush joint (air-tight and dust-proof) and, in addition, with a special joint (water resistant). Access panels for facades in the outer area are applicable for direct mounting onto solid walls (without external wall insulation system) or for installation into a wall insultion system (foam-sealed) from an insulation thickness of 80 mm http: www.bestaccessdoors.com (BA-MPL) Special advantagesEconomical solutionDelivery at short notice on requestEasy and quick installationSolid aluminum frameSophisticated solutionFlush installation in facades Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

8″ x 8″ Weather Strip Removable Access Door – BEST

8
Check Price for 8

8″ x 8″ Weather Strip Removable Access Doors BA-WSR series Access Doors are designed with flush gaskets between the panel and frame to ensure flush air seal in all types of walls and ceilings. Note: Door has NOT been tested for air tightness. BA-WSR Aluminum Drop-In Ceiling Door Specifications Door: 8″ wide x 8″ high Rough Opening Size: 8 1/2″ wide x 8 1/2″ high Material: 16 gauge galvanneal steel Lock/Latch: Screwdriver Operated Cam Latch Flange: 1″ flange Hinge: Concealed Finish: Prime coat suitable for painting.

24″ x 24″ Weather Strip Removable Access Door – BEST

24
Check Price for 24

24″ x 24″ Weather Strip Removable Access Doors BA-WSR series Access Doors are designed with flush gaskets between the panel and frame to ensure flush air seal in all types of walls and ceilings. Note: Door has NOT been tested for air tightness. BA-WSR Aluminum Drop-In Ceiling Door Specifications Door: 24″ wide x 24″ high Rough Opening Size: 24 1/2″ wide x 24 1/2″ high Material: 16 gauge galvanneal steel Lock/Latch: Screwdriver Operated Cam Latch Flange: 1″ flange Hinge: Concealed Finish: Prime coat suitable for painting.

30″ x 30″ Floor Door H20 Loading – BEST

30
Check Price for 30

24″ x 24″ Floor Door H20 Loading The Best Acces Door BA-FA-H20 series aluminum floor access doors are designed for interior and exterior applications where watertightness is not required. The angle frame construction with integral anchor flange is designed to be cast into concrete. The diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm with red vinyl grip. – Application – Designed for interior and exterior applications where watertightness is not required Product Features – Angle frame construction with integral anchor flange is designed to be cast into concrete- Diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm, along with st/stl compression spring & st/stl slamlock- Designed for off-street locations that may occasionally receive AASHTO H-20-44 wheel loads BA-FA-H20 Floor Door Specifications: – Material: Aluminum door and frame; stainless steel hinges and hardware- Door: 1/4″ aluminum diamond plate reinforced to meet AASHTO specification – H20-44 for traffic loading (16000 lb. wheel load with 30% added for impact)- Hinge: Stainless steel butt hinges with tamperproof stainless steel bolts and nuts- Frame: Angle frame fabricated from aluminum extrusion with an integral 1″ anchor flange- Opening Device: Automatic hold open arm with red vinyl grip allows door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. Stainless steel compression springs are provided to add lift assistance.- Standard Latch: Flush aluminum drop handle with st/stl slamlock- Finish: Mill finish, with optional bituminous coating on exterior of frame.

15″ x 15″ Removeable Flush Valve Panel – BEST

15
Check Price for 15

15″ x 15″ Removeable Flush Door Panel The Best Access Doors BA-AFVP provides quick and easy access to flush valves that are concealed in the wall. Constructed out of type 304 stainless steel with a #4 satin polish, the door panel is removable from the frame via tamperproof stainless steel screws. A 1-1/2″ dia. hole in the center of the panel is provided for the valve handle. – Application – Provides quick and easy access to flush valves that are concealed in the wall Product Features – Door panel is removable from the frame via tamperproof stainless steel screws- A 1-1/2″ dia. hole in the center of the panel is provided for the valve handle BA-AFVP Door Panel Specifications: – Door: Overlaps frame, completely removable via tamperproof stainless steel screws, Door panel to have 1-1/2″ dia. hole in center- Door Frame: 18 gauge stainless steel, 1-1/4″ deep- Standard Latch: Tamperproof stainless steel screws- Finish: #4 satin polish.

Recent Entries »