Category: General Tools

9373 Wacker PS 3 2200 3in Submersible Pump 220V by Wacker Corporation

9373 Wacker PS 3 2200 3in Submersible Pump 220V
Check Price for 9373 Wacker PS 3 2200 3in Submersible Pump 220V

Wacker PS 3 2200 3in Submersible Pump
Single Phase 220V/60Hz

Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.

Features and benefits

  • Lightweight, compact design for easy transport and positioning of pump.
  • Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
  • Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
  • Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
  • Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
  • Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
  • Semi-vortex impeller allows for optimum wear resistance.

Technical features

    Description Metric Inch
    Discharge diameter 80 mm 3 in
    Length x width x height 240 x 240 x 570 mm 9.5 x 9.5 x 22.5 in
    Operating weight 29,0 kg 64 lb
    Max. head 26 m 85 ft
    Max. discharge 493 l/min 130 US gpm
    Max. pressure 2,55 bar 37 psi
    Solid size capacity 8,5 mm 0.3 in
    Motor type Single phase/60 Hz
    Voltage 220 V 220 V
    Current (full load/start @ 220V) 13,0/70,0 A 13/70 A
    Speed 3.465 1/min 3,465 rpm
    Max. power output 2,2 kW 3 hp
    Cable length 10 m 32 ft
    Cable size 2,08 mm2 14 AWG
    Impeller material Ductile iron
    Impeller type Semi-vortex

    .

Posted in General Tools, Submersible Water Pumps, Water Pumps

9375 Multiquip SS233 2in Submersible Pump 110V by Multiquip

9375 Multiquip SS233 2in Submersible Pump 110V
Check Price for 9375 Multiquip SS233 2in Submersible Pump 110V

Multiquip SS233 2in Submersible Pump 110V

Multiquip’s lightweight, compact submersible pumps are the first choice for household dewatering applications such as basements and swimming pools.

Features and benefits

  • Built-in overload protection protects the motor from overheating
  • Clean-up is easy with the removable screened bottom
  • 1/2 HP, 115V, single phase, 6.0 Amp motor

Technical features

    Multiquip Water Pump
    SS233
    Gallons Per Minute (GPM)
    60 gpm
    Outlet Size (in)
    2 in.
    Inlet Size (in)
    2 in.
    Impeller Disc Size
    2 in.
    Max Head (ft)
    20 ft
    Voltage
    110 Volts
    Starting Amperage
    30 Amps
    Running Amperage
    6 Amps
    Cable Length
    20 ft
    Overall Height
    14.5 in.
    Pump Diameter
    7.25 in.
    Weight (lb)
    15.5

    .

Posted in General Tools, Submersible Water Pumps, Water Pumps

9376 Multiquip ST2037 2in Submersible Pump 110V by Multiquip

9376 Multiquip ST2037 2in Submersible Pump 110V
Check Price for 9376 Multiquip ST2037 2in Submersible Pump 110V

Multiquip ST2037 2in Submersible Pump 110V

Multiquip’s lightweight, compact submersible pumps are the first choice for household dewatering applications such as basements and swimming pools.

Features and benefits

  • Durable die cast aluminum casing cover.
  • Moves up to 73 gallons (276 liters) per minute
  • Replaceable discharge threads.
  • Maximum head of 37 feet (11.3 meters)
  • Automatic thermo-overload protection.
  • Double mechanical oil-filled seal.

Technical features

    Multiquip Water Pump
    ST2037
    Gallons Per Minute (GPM)
    73 gpm
    Outlet Size (in)
    2 in.
    Inlet Size (in)
    2 in.
    Impeller Disc Size
    2 in.
    Max Head (ft)
    37 ft
    Voltage
    110 Volts
    Starting Amperage
    34.5 Amps
    Running Amperage
    6.9 Amps
    Cable Length
    50 ft
    Overall Height
    15.5 in.
    Pump Diameter
    7.4 in.
    Weight (lb)
    31

    .

Posted in General Tools, Submersible Water Pumps, Water Pumps

D28402 DeWalt 10AMP Angle Grinder by Dewalt

D28402 DeWalt 10AMP Angle Grinder
Check Price for D28402 DeWalt 10AMP Angle Grinder

D28402 DeWalt 10AMP Angle Grinder

  • 10 Amp, 4.6lbs, 11,000 Rpm designed for faster material removal and higher overload protection.
  • Quick-Change Wheel Release provides easier and quicker wheel removal without the need for a wrench.
  • Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces.
  • Oversized, protected spindle lock button provides easier and quicker wheel changes.
  • 2 position removable side handle provides increased comfort and control.
  • Slim, ergonomic body design provides increased comfort in extended use applications.
  • 4-1/2″ blade diameter with a 5/8″-11 spindle thread.
  • Paddle switch lock-off prevent accidental start up.
  • Blade shaft lock for easy blade change.

.

Posted in Angle Grinders, General Tools, Power Tools

D28112 DeWalt 10AMP Angle Grinder by Dewalt

D28112 DeWalt 10AMP Angle Grinder
Check Price for D28112 DeWalt 10AMP Angle Grinder

Buy a DeWALT D28110 Angle Grinder and Save

  • DeWALT D28112 Angle Grinder was $90.99 now only $85.99, While supplies last

    • D28112 DeWalt 10AMP Angle Grinder

    • 10 Amp, 4.6lbs, 11,000 Rpm designed for faster material removal and higher overload protection.
    • Quick-Change Wheel Release provides easier and quicker wheel removal without the need for a wrench.
    • Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces.
    • Oversized, protected spindle lock button provides easier and quicker wheel changes.
    • 2 position removable side handle provides increased comfort and control.
    • Slim, ergonomic body design provides increased comfort in extended use applications.
    • 4-1/2″ blade diameter with a 5/8″-11 spindle thread.

    .

    Posted in Angle Grinders, General Tools, Power Tools

    9358 Wacker PG 2A 2in Centrifugal Dewatering Pump by Wacker Corporation

    9358 Wacker PG 2A 2in Centrifugal Dewatering Pump
    Check Price for 9358 Wacker PG 2A 2in Centrifugal Dewatering Pump

    Wacker PG 2A 2in Centrifugal Dewatering Pump

    Centrifugal dewatering pumps are the value alternative for keeping jobsites dry. WACKER’s PG dewatering pump series has been designed to handle the removal of relatively clean jobsite water.
    With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.

    Features and benefits

    • Cast iron impeller and volute are wear resistant for long life and minimal service.
    • Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
    • High strength lightweight diecast aluminum housing increases the years of trouble-free pump life.
    • A heavy-duty protective frame provides convenient carry handles while adding extra protection for the pump.
    • Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm), ideal for jobsites with relatively clean waters.

    Technical features

      Description Metric Inch
      Suction & discharge diameter 50 mm 2 in
      Length x width x height 480 x 375 x 395 mm 19 x 15 x 15.5 in
      Operating weight 24 kg 53 lb
      Max. head 30 m 98 ft
      Max. discharge 600 l/min 159 US gpm
      Max. suction lift 7,5 m 25 ft
      Solid size capacity 6,5 mm .25 in
      Engine Type air-cooled, 4-cycle, single cylinder, gasoline engine Honda
      Displacement 118 cm3 7.2 in3
      Max. power output 3,0 kW 4 hp
      at 3.600 1/min 3,600 rpm
      Operating power 2,7 kW 3.6 hp
      at 3.600 1/min 3,600 rpm
      Fuel tank capacity 2,5 l 2.6 US qt
      Fuel consumption 1,3 l/h 1.4 US qt/h
      .

    Posted in Centrifugal Water Pumps, General Tools, Water Pumps

    9362 Wacker PT 3A 3in Centrifugal Trash Pump by Wacker Corporation

    9362 Wacker PT 3A 3in Centrifugal Trash Pump
    Check Price for 9362 Wacker PT 3A 3in Centrifugal Trash Pump

    Wacker PT 3A 3″ Centrifugal Trash Pump

    Centrifugal trash pumps are designed to keeping jobsite dry
    WACKER’s centrifugal trash pumps have proven themselves on jobsites around the world.
    With an optimized impeller design and built-in contractor friendly features, this line of trash pumps has redefined the quality and durability standards of self-priming centrifugal trash pumps.

    Features and benefits

    • Self-priming high performance pump capable of handling solids up to 1.5 inch, ideal for most jobsites that require fast dewatering on command.
    • Hardened ductile iron impeller and volute with a patented volute insert provides a rugged, easy to maintain pump that will stay on the job longer.High strength, lightweight aluminum housing, compact with easy access, allows extra years of trouble-free operation.
    • High strength lightweight diecast aluminum housing increases the years of trouble-free pump life.
    • Radial flow design produces high volume and head for superior pump performance.
    • Quality components such as carbon ceramic mechanical seals for extra long life.

    Technical features

      Description Metric Inch
      Suction & discharge diameter 75 mm 3 in
      Length x width x height 675 x 505 x 570 mm 26 x 20 x 23 in
      Operating weight 64 kg 141 lb
      Max. head 29 m 96 ft
      Max. discharge 1.515 l/min 400 US gpm
      Max. suction lift 7,6 m 25 ft
      Solid size capacity 38 mm 1.5 in
      Engine Type air-cooled, 4-cycle, single cylinder, gasoline engine Honda
      Displacement 242 cm3 14.8 in3
      Max. power output 6 kW 8 hp
      Operating speed 3.500 1/min 3,500 rpm
      Fuel capacity 6,0 l 6.4 US qt
      Max. fuel consumption 2,7 l/h 2.8 US qt/h

    .

    Posted in General Tools, Trash Pumps, Water Pumps

    9363 Wacker PDT 2A 2in Diaphragm Trash Pump by Wacker Corporation

    9363 Wacker PDT 2A 2in Diaphragm Trash Pump
    Check Price for 9363 Wacker PDT 2A 2in Diaphragm Trash Pump

    Wacker PDT2A 2in Diaphragm Trash Pump

    Diaphragm trash pumps for jobs no other pumps can handle
    WACKER’s diaphragm trash pumps can move anything that flows.
    Built with high quality components, you will be assured of many years of top performance and durability.
    Designed to handle solids up to 1-1/4″ (32mm), ideal for dewatering mud slurries and seepage areas.

    Features and benefits

    • Aluminum alloy body with heavy-duty pump diaphragm provides a lightweight, reduced maintenance package that ensures long life.
    • Surge chamber on inlet side results in smooth pumping operation by absorbing pressure spikes while reducing wear.Oil bath lubricated transmission ensures continuous lubrication to all parts of the gear transmission system, reducing both maintenance costs and lost production time.
    • Hardened forged gears extend pump life and provide efficient power transmission from the engine to the pump.
    • Straight through water flow design provides high production pump capacity and less down time blockages.

    Technical features

      Description Metric Inch
      Suction & discharge diameter 50 mm 2 in
      Length x width x height 965 x 660 x 610 mm 38 x 26 x 24 in
      Operating weight 52 kg 114 lb
      Max. discharge head 7,5 m 25 ft
      Max. discharge 189 l/min 50 US gpm
      Max. suction lift 7,5 m 25 ft
      Solid size capacity 32 mm 1.25 in
      Engine Type air-cooled, 4-cycle, single cylinder, Honda gasoline engine
      Displacement 118 cm3 7.2 in3
      Max. power output according to DIN-ISO 3046 3,0 kW 4.0 hp
      Operating speed 3.000 1/min 3,000 rpm
      Fuel capacity 2,5 l 2.6 US qt
      Max fuel consumption 1,1 l/h 1.2 US qt/h

      .

    Posted in Diaphragm Water Pumps, General Tools, Water Pumps

    9364 Wacker PDT 3A 3in Diaphragm Trash Pump by Wacker Corporation

    9364 Wacker PDT 3A 3in Diaphragm Trash Pump
    Check Price for 9364 Wacker PDT 3A 3in Diaphragm Trash Pump

    Wacker PDT3A 3in Diaphragm Trash Pump

    Diaphragm trash pumps for jobs no other pumps can handle
    WACKER’s diaphragm trash pumps can move anything that flows. Built with high quality components, you will be assured of many years of top performance and durability. Designed to handle solids up to 1-3/4″ (45mm), ideal for dewatering mud slurries and seepage areas.

    Features and benefits

    • Aluminum alloy body with heavy-duty pump diaphragm provides a lightweight, reduced maintenance package that ensures long life.
    • Surge chamber on inlet side results in smooth pumping operation by absorbing pressure spikes while reducing wear.Oil bath lubricated transmission ensures continuous lubrication to all parts of the gear transmission system, reducing both maintenance costs and lost production time.
    • Hardened forged gears extend pump life and provide efficient power transmission from the engine to the pump.
    • Straight through water flow design provides high production pump capacity and less down time blockages.

    Technical features

      Description Metric Inch
      Suction & discharge diameter 75 mm 3 in
      Length x width x height 990 x 760 x 635 mm 39 x 30 x 25 in
      Operating weight 63 kg 138 lb
      Max. discharge head 7,5 m 25 ft
      Max. discharge 333 l/min 88 US gpm
      Max. suction lift 7,5 m 25 ft
      Solid size capacity 45 mm 1.75 in
      Engine Type air-cooled, 4-cycle, single cylinder, Honda gasoline engine
      Displacement 118 cm3 7.2 in3
      Max. power output according to DIN-ISO 3046 3,0 kW 4.0 hp
      Operating speed 3.000 1/min 3,000 rpm
      Fuel capacity 2,5 l 2.6 US qt
      Max fuel consumption 1,1 l/h 1.2 US qt/h

      .

    Posted in Diaphragm Water Pumps, General Tools, Water Pumps
    1. Pages:
    3. 1
    4. 2
    5. 3
    6. 4
    7. 5
    8. 6
    9. 7
    10. 8
    11. 9
    12. 10
     Recent Entries »