Best Door Tools Store

16″ x 16″ Removeable Duct Door for Fibreglass Ducts Best Access Doors Access Panels for Fiberglass Ducts are designed to provide convenient, economical access to fiberglass ducts. These doors are for use in low to medium pressure fiberglass ducts. Duct access panels from Best Access Doors for Fiberglass Ducts are available in double cam – construction. – Application – Economical access to fibreglass ducts Product Features – These doors are for use in low to medium pressure fibreglass ducts- Double cam – no hinge, removable door panel BA-CD-5080-F Duct Access Door Specifications: – Door: 24 gauge galvanized steel- Frame: 24 gauge galvanized steel – Insulation: 1″ Micro-Airc M/F type 475- Gasketing: 1/8″ thick by 1/2″ wide closed cell neoprene gasketing between door and frame. 1/16″ thick by 11/2″ adhesive bonded gasket between frame to duct- Latch: Self tightening, hand operated cam latch.

16″ x 16″ Duct Door for Fibreglass DuctsBest Access Doors Duct Access Panels for Fiberglass Ducts are designed to provide convenient, economical access to fiberglass ducts. These doors are for use in low to medium pressure fiberglass ducts. Duct access doors from Best Access Doors for Fiberglass Ducts are available in either hinged -. – Application – Economical access to fibreglass ducts Product Features – These doors are for use in low to medium pressure fibreglass ducts- Hinged door panel BA-HD-5070-F “Hinged” Fibreglass Duct Doors Specifications: – Door: 24 gauge galvanized steel- Frame: 24 gauge galvanized steel- Hinge: Continuous aluminum piano hinge – Insulation: Insulation 1″ Micro-AIRC M/F TYPE-475 R value 7.7 – Gasketing: 1/8″ thick by 1/2″ wide closed cell neoprene gasketing between door and frame and also between frame and duct- Latch: Self tightening, hand operated cam latch.

24″ x 48″ Large Walk Through Access Door The Best Access Doors BA-WD-8000 Walk Through Access Door is designed to provide convenient walk through access to duct work interiors and air handling units. The heavy duty construction, along with a continuous hinge and compression handles provide for low leakage in low to medium pressure systems and plenums. – Application – Designed to provide convenient walk through access to duct work interiors and air handling units- Low to medium pressure systems and plenums Product Features – Heavy duty construction, along with a continuous hinge and compression handles- Optional Features: Removable Door Panel / Vision Panel / High Pressure Units / Key Operated Handles BA-WD-8000 Access Door Specifications: – Door / Door Frame: 22 gauge galvanized steel, double pane frame is 1 15/16″ wide x 1 1/2″ deep extruded aluminum with mitred corners- Hinge: Continuous steel piano hinge-opens 180o- Insulation: Door panel filled with 1″ thick fibreglass insulation – 4 R value- Gasket: 1/8″ thick x 1/2″ wide closed cell neoprene gasketing between door and frame- Standard Latch: Dual acting compression handles-operable from both sides. Units 48″ high and under to have 2 handles. Units over 48″ high to have 3 handles- Finish: Mill finish.

9″ x 8″ Duct Door for Round Ducts with 8″ Diameter The Best Access Doors BA-RD-5090 is designed to provide convenient, economical access to round ducts. The pull and catch lock system, along with the gasketing on the door assures a tight seal without obstruction in the air system. The steel continuous piano hinge provides for easy installation. – Application – Economical access to round ducts Product Features – Pull and catch lock system- Gasketing on the door assures a tight seal without obstruction in the air system BA-RD-5090 Duct Access Door Specifications: – Door / Door Frame: 16 gauge galvanized steel- Gasketing: 1/8″ thick by 1″ wide closed cell neoprene- Standard Latch: Plated steel pull and catch- Finish: Mill / Aluminum.

30″ x 36″ Large Walk Through Access Door The Best Access Doors BA-WD-8000 Walk Through Access Door is designed to provide convenient walk through access to duct work interiors and air handling units. The heavy duty construction, along with a continuous hinge and compression handles provide for low leakage in low to medium pressure systems and plenums. – Application – Designed to provide convenient walk through access to duct work interiors and air handling units- Low to medium pressure systems and plenums Product Features – Heavy duty construction, along with a continuous hinge and compression handles- Optional Features: Removable Door Panel / Vision Panel / High Pressure Units / Key Operated Handles BA-WD-8000 Access Door Specifications: – Door / Door Frame: 22 gauge galvanized steel, double pane frame is 1 15/16″ wide x 1 1/2″ deep extruded aluminum with mitred corners- Hinge: Continuous steel piano hinge-opens 180o- Insulation: Door panel filled with 1″ thick fibreglass insulation – 4 R value- Gasket: 1/8″ thick x 1/2″ wide closed cell neoprene gasketing between door and frame- Standard Latch: Dual acting compression handles-operable from both sides. Units 48″ high and under to have 2 handles. Units over 48″ high to have 3 handles- Finish: Mill finish.

12″ x 12″ High Pressure Duct Door Best Access Doors Duct Access Panels for High Pressure Ducts are designed to provide convenient, economical access to high pressure ducts. These doors are for use in high pressure ducts up to 8″ static pressure. Pressure rated to 8″ W.G. with leakage no greater than 2 CFM per sq. ft. or less. The 5/8″ notched knock over tabs on the inside of the frame provide for easy installation. When required, doors can be made out of aluminum or stainless steel. Other options include: duct doors for fiberglass duct board, duct doors with vision panels, walk in doors and access doors for round ducts. – Application – Economical access to high pressure ductsProduct Features- These doors are for use in high pressure ducts up to 8″ static pressure. Pressure rated to 8″ W.G. with leakage no greater than 2 CFM per sq. ft. or less.- 5/8″ notched knock over tabs on the inside of the frame provide for easy installation BA-CD-5080-HP Duct Access Door Specifications: – Door: 24 gauge galvanized steel,double panel with high temperature glue- Frame: 24 gauge galvanized steel with 5/8″ notched knock over tabs- Insulation: Door panel filled with 2″ fibreglass insulation (7.7 R factor), compressed into 1″. – Gasketing: 1/4″ thick by 1/2″ wide closed cell neoprene gasketing between door and frame. 1/8″ thick by 1/2″ wide closed cell neoprene gasketing between frame and duct- Latch: Self tightening, hand operated cam latch.

8″ x 6″ Duct Door for Round Ducts with 7″ Diameter The Best Access Doors BA-RD-5090 is designed to provide convenient, economical access to round ducts. The pull and catch lock system, along with the gasketing on the door assures a tight seal without obstruction in the air system. The steel continuous piano hinge provides for easy installation. – Application – Economical access to round ducts Product Features – Pull and catch lock system- Gasketing on the door assures a tight seal without obstruction in the air system BA-RD-5090 Duct Access Door Specifications: – Door / Door Frame: 16 gauge galvanized steel- Gasketing: 1/8″ thick by 1″ wide closed cell neoprene- Standard Latch: Plated steel pull and catch- Finish: Mill / Aluminum.

10″ x 10″ High Pressure Duct Door Best Access Doors Duct Access Panels for High Pressure Ducts are designed to provide convenient, economical access to high pressure ducts. These doors are for use in high pressure ducts up to 8″ static pressure. Pressure rated to 8″ W.G. with leakage no greater than 2 CFM per sq. ft. or less. The 5/8″ notched knock over tabs on the inside of the frame provide for easy installation. When required, doors can be made out of aluminum or stainless steel. Other options include: duct doors for fiberglass duct board, duct doors with vision panels, walk in doors and access doors for round ducts. – Application – Economical access to high pressure ductsProduct Features- These doors are for use in high pressure ducts up to 8″ static pressure. Pressure rated to 8″ W.G. with leakage no greater than 2 CFM per sq. ft. or less.- 5/8″ notched knock over tabs on the inside of the frame provide for easy installation BA-CD-5080-HP Duct Access Door Specifications: – Door: 24 gauge galvanized steel,double panel with high temperature glue- Frame: 24 gauge galvanized steel with 5/8″ notched knock over tabs- Insulation: Door panel filled with 2″ fibreglass insulation (7.7 R factor), compressed into 1″. – Gasketing: 1/4″ thick by 1/2″ wide closed cell neoprene gasketing between door and frame. 1/8″ thick by 1/2″ wide closed cell neoprene gasketing between frame and duct- Latch: Self tightening, hand operated cam latch.

14″ x 14″ Duct Door for Fibreglass DuctsBest Access Doors Duct Access Panels for Fiberglass Ducts are designed to provide convenient, economical access to fiberglass ducts. These doors are for use in low to medium pressure fiberglass ducts. Duct access doors from Best Access Doors for Fiberglass Ducts are available in either hinged -. – Application – Economical access to fibreglass ducts Product Features – These doors are for use in low to medium pressure fibreglass ducts- Hinged door panel BA-HD-5070-F “Hinged” Fibreglass Duct Doors Specifications: – Door: 24 gauge galvanized steel- Frame: 24 gauge galvanized steel- Hinge: Continuous aluminum piano hinge – Insulation: Insulation 1″ Micro-AIRC M/F TYPE-475 R value 7.7 – Gasketing: 1/8″ thick by 1/2″ wide closed cell neoprene gasketing between door and frame and also between frame and duct- Latch: Self tightening, hand operated cam latch.

8″ x 8″ High Pressure Duct Door Best Access Doors Duct Access Panels for High Pressure Ducts are designed to provide convenient, economical access to high pressure ducts. These doors are for use in high pressure ducts up to 8″ static pressure. Pressure rated to 8″ W.G. with leakage no greater than 2 CFM per sq. ft. or less. The 5/8″ notched knock over tabs on the inside of the frame provide for easy installation. When required, doors can be made out of aluminum or stainless steel. Other options include: duct doors for fiberglass duct board, duct doors with vision panels, walk in doors and access doors for round ducts. – Application – Economical access to high pressure ductsProduct Features- These doors are for use in high pressure ducts up to 8″ static pressure. Pressure rated to 8″ W.G. with leakage no greater than 2 CFM per sq. ft. or less.- 5/8″ notched knock over tabs on the inside of the frame provide for easy installation BA-CD-5080-HP Duct Access Door Specifications: – Door: 24 gauge galvanized steel,double panel with high temperature glue- Frame: 24 gauge galvanized steel with 5/8″ notched knock over tabs- Insulation: Door panel filled with 2″ fibreglass insulation (7.7 R factor), compressed into 1″. – Gasketing: 1/4″ thick by 1/2″ wide closed cell neoprene gasketing between door and frame. 1/8″ thick by 1/2″ wide closed cell neoprene gasketing between frame and duct- Latch: Self tightening, hand operated cam latch.