Category: Concrete & Masonry Saws

6566 MK-BX-4 14in Brick Saw by MK

6566 MK-BX-4 14in Brick Saw
Check Price for 6566 MK-BX-4 14in Brick Saw

MK-BX-4 Brick Saw Features

  • Free shipping from MK warehouse, to lower 48 states;
    we will charge applicable sales tax, for a factory direct drop-ship In the state of California
  • Portable and lightweight
  • Free 14″ dry masonry diamond blade
  • Open-back design allows for material up to 16″ long to be cut
  • Easy to grip nylon handle with built-in lockable trigger switch
  • Water misting dust control system
  • Plastic dust collection pan
  • Replaceable dust filter
  • Built-in table lock
  • Spring-loaded head can be locked in the down position
  • Heavy-duty cast aluminum rolling conveyor cart
  • Length of cut 16″, Max material size 8″x8″x16″.
  • LxWxH 35″ x 24″ x 21″.
  • 15 Amps Motor, blade rotation 3500 Rpm.
  • One-year warranty

.

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Masonry Brick Saws

6567 MK-BX-4 Brick Saw & Stand by MK

6567 MK-BX-4 Brick Saw & Stand
Check Price for 6567 MK-BX-4 Brick Saw & Stand

MK-BX-4 Brick Saw Features

  • Free shipping from MK warehouse, to lower 48 states;
    we will charge applicable sales tax, for a factory direct drop-ship In the state of California
  • Portable and lightweight
  • Free 14″ MK dry cutting diamond blade, & stand.
  • Open-back design allows for material up to 16″ long to be cut
  • Easy to grip nylon handle with built-in lockable trigger switch
  • Water misting dust control system
  • Plastic dust collection pan
  • Replaceable dust filter
  • Built-in table lock
  • Spring-loaded head can be locked in the down position
  • Heavy-duty cast aluminum rolling conveyor cart
  • Length of cut 16″, Max material size 8″x8″x16″.
  • LxWxH 35″ x 24″ x 21″.
  • 15 Amps Motor, blade rotation 3500 Rpm.
  • One-year warranty

.

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Masonry Brick Saws

6570 Imer Masonry 500 20in Block Saw by

6570 Imer Masonry 500 20in Block Saw
Check Price for 6570 Imer Masonry 500 20in Block Saw

Imer Blockhead Masonry 500

The Masonry 500 block head delivers fast, accurate, vibration free cutting performance.

  • Free Shipping from IMER factory warehouse
  • 16″ x 16″ Heavy Duty table has room to cut 2 – 8″ blocks at one time
  • Enough tray travel to lock head and push material eliminates pull down cutting
  • 9 hp Honda motor with oil clutch and single ribbed belt is vibration free
  • Available with 5 hp 220V Electric motor
  • Emergency stop switch with in easy operator reach
  • The Stand is built into the frame (14″ and 20″ saws) for stable and secure cutting
  • Honda gas motors with centrifugal clutch eliminates the need for jack shafts and pulleys
  • Electric 110 Volts models are designed to run anywhere with ease; breakers won’t trip on startup!
  • Locking stainless steel protractor comes standard with all saw models
  • Removable poly trays for easy cleanup
  • Cut blocks the 12″ way to cut out webs for bond beams

Accuracy

  • The cutting tray roller system is the best in the industry.
  • The two 1″ steel guide bars provide great accuracy and are fully adjustable.
  • This saw will remain accurate for years to come!

Versatility

  • The single arm frame design allows the passage of large or irregular materials.

.

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Masonry Block Saws

6550 MK-2000 Series Masonry Saw by

6550 MK-2000 Series Masonry Saw
Check Price for 6550 MK-2000 Series Masonry Saw

MK-2000 Series Masonry Saw

  • Call for special coupon savings
  • We will charge applicable sales tax, for a factory direct drop-ship In the state of California
  • Open-back design allows for material up to 16″ long to be cut
  • One-year limited warranty

MK-2000 Electric Saw Features

  • Professionally engineered, thermally protected, dual-voltage motor
  • Single voltage motor also available
  • Convenient toggle switch to change motor from 115V and 230V

MK-2000 Gas Saw Features

  • Shock-absorbing engine mounts for smooth operation
  • Shaft system utilizes Micro “V” belts and precision machined pulleys
  • Belt driven, self-priming centrifugal water pump on gas series saws

    • .

    Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Masonry Block Saws

    6560 MK-9000 Series Walk-Behind Concrete Saw by

    6560 MK-9000 Series Walk-Behind Concrete Saw
    Check Price for 6560 MK-9000 Series Walk-Behind Concrete Saw

    MK-9000 Series Walk-Behind Concrete Saw

    • Free shipping from MK warehouse, to lower 48 states.
    • Free 14″ MK-500 wet cutting concrete blade and lifting bail
    • 8% sales tax on orders shipped to residence of CA
      • One-piece box construction chassis made from 3/16″ hot-rolled steel will not flex during operation
      • Powder-coated chassis resists peeling & corrosion
      • Cast-aluminum hinged blade guard
      • Stainless steel water distribution system supplies water to both sides of blade
      • Blade guard mounts on both left- or right-hand side of saw and cuts within 1″ of wall or curb
      • 1-1/4″ blade shaft supported by two heavy-duty, self-aligning pillow block bearings
      • Power delivered to arbor via dual heavy duty notched v-belts
      • Depth control assembly engineered for smooth, controlled blade insertion
      • Positive-locking depth control mechanism
      • Durable 8″x 2-1/4″ non-slip rubber wheels with maintenance-free hubs & roller bearings
      • Rugged adjustable V-shaped pointer wheel assembly is durable and accurate. Adaptable for left- and right-handed cutting
      • Engine mounts engineered to ensure minimal frame harmonics

      .

    Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Push Walk-Behind Concrete Saws

    6870 Husqvarna K960 Concrete Ring Saw by Husqvarna

    6870 Husqvarna K960 Concrete Ring Saw
    Check Price for 6870 Husqvarna K960 Concrete Ring Saw

    Husqvarna K960 Concrete Ring Saw

  • Free shipping from factory warehouse
  • Available February 16
  • Replacement for the K950

    • 14″ Diamond concrete Ring Blades

  • ELR20 14″ Ring blade for working in hard to very hard concrete
  • ELR45 14″ Ring Blade Medium-hard blade with a wide range of applications
  • 14″ ELR70 14″ Ring Blade Hard blade for cutting soft building material
  • 14″ SLR45 14″ Ring Blade Moderately hard blade with a wide range of applications

    • K950 concrete Ring Saw is Suitable for

    • Deep concrete cutting
    • Gas/water/sewer maintenance
    • Demolition work
    • Indoor/Refurbishment work

    K950 Ring Saw General Info

    Husqvarna has created the first 14″ gas powered saw with a 10″ cutting depth. This might seem impossible because a standard 14″ blade cuts to a maximum depth of 5″. In the mid-1980’s we invented and patented the unique hydraulic Ring Saw. The drive disk rotates the ring blade from the inner edge of the blade, not the center where the axle limits the cutting depth. With its thoroughly tested ring cutting principle and sensational 10″ cutting depth, the K950 Ring Saw also has the maneuverability and versatility of a gas-powered saw, giving you the best of both worlds.

    Increase your capacity and your cutting possibilities

    The K950 Ring Saw is a completely new saw that is just as handy, maneuverable and versatile as an ordinary gas-powered saw. You can quickly and easily cut through 10″ walls, ceilings and floors from one side. Since the widest part of the cutting blade is inside the material, over cutting in the corners can practically be eliminated. The result is more efficient work with cleaner cuts and fewer touch ups. Another advantage, there is less digging when cutting around pipes that are lying in trenches.

    To sum it up, Husqvarna’s new K950 Ring Saw opens up new possibilities for applications that cannot be done with a standard gas-powered saw and you can double your capacity.

    Husqvarna’s patented drive principle

    Our experience of the ring saw principle is long and unique, this helped us improve the design over the years. The blade is guided by and runs on four rollers at the outside edge of the blade. Two engagement rollers fit into a groove on the side of the blade and force the blade, under spring tension, forward in the drive wheel. The drive wheel is powered by the gas engine. The V shaped groove in the wheel drives the inside rim of the blade much like a pulley drives a V-belt. The other two rollers (support rollers) hold the blade in place from the other side.

    .

    Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Gas Cut-Off Saws

    6876 Husqvarna K650 Cut-n-Break Concrete Saw by Husqvarna

    6876 Husqvarna K650 Cut-n-Break Concrete Saw
    Check Price for 6876 Husqvarna K650 Cut-n-Break Concrete Saw

    Partner by Husqvarna K650 Cut-n-Break With Blades

    Free shipping from factory warehouse
  • Dual 9″ Diamond concrete Blades included
  • Depth of Cut: 2-1/2″ per pass with a maximum of 16″

    • Partner by Husqvarna K650 Cut-n-Break is Suitable for:

    • Precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.
    • Grooves can be quickly cut to create a channel for up to 3/4″ wide, perfect for water lines and electrical conduit in a single pass.
    • The double blade system also aids in faster crack renovation and expansion joint repair.
    • Integrated water head kit

    Specifications:

    • Air cooled, two cycle 4.8hp / 71cc engine
    • 22.3 lbs. complete with blades.
    • Standard arbor bushing 1” (25.4 mm)

    K650 Cut-n-Break General Info

    The new K650 Cut-n-Break features an entirely new cutting method for cuts as deep as 16″ (400 mm) at a very economical tooling cost.

    The K650 Cut-n-Break has a wide range of applications. It eliminates over-cutting on all types of openings requiring square corners. Precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.

    The design of the power head is based on one of the most popular cut-off saws in the industry, the K650 Active. This means the engine has all the classic Partner benefits, such as the revolutionary Active Air Filtration™ filter system, the SmartCarb™ carburetor, EasyStart™, sealed transmission and a lot more.

    The new K650 Cut-n-Break is easy to use and maintain with low tooling and maintenance costs.

    CUT IN STAGES THROUGH WALLS UP TO 16″ (400 mm) THICK.

    1. Each cut can be made up to 2–1/2″ (65 mm) deep.
    2. The twin blades form a core in the saw cut.
    3. The core is simply broken away using the breaking tool that is supplied with the K650 Cut-n-Break.
    4. When the core has been broken away, repeat the cut until the required cutting depth is achieved. Maximum 16″ (400 mm).

    K650 Cut-n-Break Features

    • SmartCarb
    • Active Air Filtration
    • EasyStart
    • Efficient cutter
    • Easy Adjustable blade guard
    • Startercord
    • Twin blades

    The Cut-n-Break method allows you to cut in stages through walls up to 16″ thick

      1. Each cut can be up to 2.5″ deep
      2. Since the cutter has twin blades, a core is formed in the saw cut
      3. The core can easily be broken off, using the accompanying breaking tool
      4. When the core has been broken off, continue cutting until the required
        depth is reached, Maximum 16″

    .

    Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Gas Cut-Off Saws
    1. Pages:
    3. 1
    4. 2
    5. 3
    6. 4
    7. 5
    8. 6
    9. 7
    10. 8
     Recent Entries »