9464 Pramac Pi4300 Inverter Generator 4,300W by Pramac

9464 Pramac Pi4300 Inverter Generator 4,300W
Check Price for 9464 Pramac Pi4300 Inverter Generator 4,300W

Pramac Pi4300 Inverter Generator

  • The Pi4300 is built using tubular steel frames and steel fuel tank to cope with rough situations.
  • The 4 wheels carriage makes it easy to transport on any surface.
  • Weight 163 lb.
  • 7.7 hours runtime @75%, from 3.38 gallon fuel tank
  • Recoil starter system with electronic ignition makes for easy starting and reliable, consistent service
  • Fully enclosed design for reduced sound output of 62 dB and protection
  • Inverter technology reduces the overall size and weight by up to one third in comparison with similar class generators.
  • Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low
  • Display incorporates voltmeter, frequencymeter, hourmeter and fuel level.
  • Allows operations under an overload conditions up to 120% of the rated output for 20 seconds before output is cut off.
  • This allows the starting of demanding loads such as air conditioners & compressors.
  • Inverters are ideal for recreational, medical, standby and for powering equipment sensitive to voltage surges (eg. computers) which also gives the cleanest sine wave possible compared to all other generators.
  • The sine wave is measured in THD or Total Harmonic Distortion.
  • All Pramac products are exceptional in this category but the inverters are half that number to 3% Total Harmonic Distortion.
Pramac Inverter
Pi4300
Dry weight
163 lbs
Generator Length x width x height
22.83″ x 20.74″ x 24.33″
Continuous Watts
4.3 kW
Maximum Watts
4.8 kW
Engine
Subaru EX270, 4-stroke
Displacement
265cc
Fuel capacity
3.38 US gal
Horse Power
6.3 hp
Sound level at max.load
(dB(A)at 23 ft)
62 dB(A)

.