9463 Pramac Pi2800 Inverter Generator 2,800W by Pramac

9463 Pramac Pi2800 Inverter Generator 2,800W
Check Price for 9463 Pramac Pi2800 Inverter Generator 2,800W

Pramac Pi2800 Inverter Generator

  • The Pi2800 is built using tubular steel frames and steel fuel tank to cope with rough situations.
  • The 4 wheels carriage makes it easy to transport on any surface.
  • Weight 119 lbs.
  • 8.6 hours runtime from 2.85 gallon fuel tank
  • Recoil starter system with electronic ignition makes for easy starting and reliable, consistent service
  • Fully enclosed design for reduced sound output of 58 dB and protection
  • Inverter technology reduces the overall size and weight by up to one third in comparison with similar class generators.
  • Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low
  • Display incorporates voltmeter, frequency meter, hour meter and fuel level.
  • Allows operations under an overload conditions up to 120% of the rated output for 20 seconds before output is cut off.
  • This allows the starting of demanding loads such as air conditioners & compressors.
  • Inverters are ideal for recreational, medical, standby and for powering equipment sensitive to voltage surges (eg. computers) which also gives the cleanest sine wave possible compared to all other generators.
  • The sine wave is measured in THD or Total Harmonic Distortion.
  • All Pramac products are exceptional in this category but the inverters are half that number to 3% Total Harmonic Distortion.
Pramac Inverter
Pi2800
Dry weight
119 lbs
Generator Length x width x height
21.14″ x 18.97″ x 22.95″
Continuous Watts
2.5 kW
Maximum Watts
2.8 kW
Engine
Subaru EX170, 4-stroke
Displacement
169cc
Fuel capacity
2.85 US gal
Horse Power
4 hp
Sound level at max.load
(dB(A)at 23 ft)
58 dB(A)

.