Category: 20in to 25in Tile Saws

6391K Felker 24in Tile Master Plus Wet Tile Saw Kit by Husqvarna

6391K Felker 24in Tile Master Plus Wet Tile Saw Kit
Check Price for 6391K Felker 24in Tile Master Plus Wet Tile Saw Kit

Felker Tile Master Plus Wet Tile Saw Features

  • Free shipping from the Felker factory warehouse
  • Free 3pcs cutting package (a $49.99 value).
  • Free Folding stand (a $84.99 value).

More Power!

Made exclusively for Felker by Baldor, the Tile Master Plus’ high torque 1-1/2 hp continuous duty motor is more efficient for running on a 15 amp breaker. It allows the operator to cut a wider range of material faster. This motor is CSA rated, features thermal protection and utilizes a large frame design.

New Features for the Tile Master Plus

The new saw features a spring-assisted plunge cut capability to make cuts for outlets or other openings quickly and easily. Remove old blades easily with the new blade-shaft lock. A larger conveyor cart makes cutting large tile easier. The cam adjustment makes tensioning the belt simple. The optional adjustable rolling stand makes moving the saw to and from the job-site easier.

Tilt-up Blade Guard

A single wing nut holds the blade guard in place, allowing the guard to tilt-up for fast blade changes, which reduces costly downtime. The heavy-duty cast aluminum guard provides maximum protection for the operator. A thicker water hose connects to the outside of the blade guard and evenly distributes water to both sides of the lade. This prevents the loss of blade side clearance, protecting the integrity of the blade for longer life and more accurate cuts. The wide blade guard prevents rubbing of profile wheels against the sides of the guard for reduced noise and easier wheel installation.

.

5824 QEP 60024 Professional Wet Saw & Stand by QEP

5824 QEP 60024 Professional Wet Saw & Stand
Check Price for 5824 QEP 60024 Professional Wet Saw & Stand

QEP 60024 24″ Wet Saw Features

  • Free shipping from Q.E.P warehouse to a commercial address in the continental USA
  • Rip cuts 24″ tile, diagonally cuts 17″ x 17″ tile
  • Plastic shaft bearing housing can overheat when cutting porcelain. We do not recommend this saw for intensive Porcelain tile cutting, using a good quality porcelain blade will extend the life of the bearings.
  • Rustproof, removable plastic water tray for easy cleaning
  • One year warranty

Accessories

  • Heavy-duty stand with rear locking wheels
  • High volume water pump
  • 10″ continuous rim wet diamond blade
  • Side and front extension tables
  • Miter block guide & rip guide

.

5925K MK-100 Wet Tile Saw Kit W/Stand by MK

5925K MK-100 Wet Tile Saw Kit W/Stand
Check Price for 5925K MK-100 Wet Tile Saw Kit W/Stand

MK-100 Tile Wet Saw Kit Features

  • Entry level professional quality saw
  • Free 10″ MK diamond blade, stand, water pump, rip guide, dressing stone, adjustable protractor, & dual angle guide
  • MK-100 Wet Saw General Information

    • Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
    • Two position motor post cutting head for convenient cutting of various tile sizes
    • Built-in water distribution system supplies water to both sides of blade
    • Variable height cutting head allows for plunge cutting and use of blades smaller that 10″ diameter
    • Blade guard accommodates 6″‘ and 8″ profile wheels
    • Micro V-belt drive
    • Linear-Bearing and chrome plated guide-bar assembly ensure precise cutting
    • Blade shaft lock for easy blade removal
    • One-piece reinforced zinc-plated steel frame

    .

    5837 Imer Combicut 200VA Wet Saw by Imer

    5837 Imer Combicut 200VA Wet Saw
    Check Price for 5837 Imer Combicut 200VA Wet Saw

    All New Combi lighter, & able to plunge cut! Most popular saw in it’s class.

    • Free Shipping
    • Free folding stand, side cutting table and porcelain blade included
    • Manufactured using the latest die cast aluminum fusion technology
    • Light weight! Only 45 lbs
    • Rip cut 24″, diagonally cuts 16″x 16″ tile
    • Adjustable cutting head makes plunge cuts and L cuts a snap
    • 45 degree miter cuts, just tilt the cutting head
    • 8″ blade capacity, 5/8″ arbor
    • 1HP motor, 115V, blade speed 2800 Rpm

    IMER’S MESSAGE
    “The COMBI 200VA from IMER U.S.A., is the most accurate lightweight tile saw made today. Designed and built to last, the COMBI 200VA is equally at home in the hands of the professional installer or the first time user”.

    Mace T. Coleman Jr.
    President IMER U.S.A.

    .

    5711 Pearl VX10.2XL PRO Tile Saw & Stand by PEARL

    5711 Pearl VX10.2XL PRO Tile Saw & Stand
    Check Price for 5711 Pearl VX10.2XL PRO Tile Saw & Stand

    Pearl VX10.2XL Pro Wet Tile Saw & Stand

    • Free stand and diamond blade.

    Features

    • Compact professional quality saw that cuts larger format tiles
    • Stainless Steel water pan
    • Heavy duty Belt driven 2 hp motor, 115 volts.
    • Industrial ball bearing rollers ensure smooth, precise cart movement
    • Liquid cooled shaft bearing housing!
    • Weighs only 83 lbs.
    • Compact design only 23″ long fits in trunk of car.
    • Rips: 24″, diagonally cuts 18″ x 18″ tile.
    • Telescopic cutting table.
    • Saw dimensions 23″L x 22-1/2″W x 19″H.
    • Inlcudes: Diamond blade, blade wrench, 45/90 rip guide, tub, drip tray, water pump, miter block, product manual, warranty card.

    .

    5223 Gemini Revolution XT Curve Cutting Saw by Gemini

    5223 Gemini Revolution XT Curve Cutting Saw
    Check Price for 5223 Gemini Revolution XT Curve Cutting Saw

    Gemini Revolution XT Tile Saw

  • We do not recommend this saw for straight cuts
  • Cuts a radius, curve or straight line!

    • 10″ Diamond Ring ring blade cuts up to 2″ thick materials
    • The Ring Blade has no center giving you the ability to cut intricate designs and tight radius cuts as small as 1/2″
    • Has 5 times more power (torque) than other 1.5 hp saws!
    • Weight: 39 lbs
    • 1 hp, 115V, high torque motor
    • Makes curved cuts in 2″ granite!
    • Two year warranty

    Gemini Revolution Tile Saw FAQ

      Q: Where is the water pump?

      A: There is no pump with a ring saw. Because the belt that drives the blade also picks up and delivers water to the cut, there is no need for one.

      Q: What is a Ring Saw?

      A: A Ring Saw is a unique, patented saw, combining the best qualities of a band saw and radial saw.

      Q: What does the Ring Saw cut?

      A: The Ring Saw will cut any hard material including stone, granite, marble, glass, shell, non ferrous metals, acrylic, and plexiglass.

      Q: How can diamond blades cut hard materials but do not cut skin?

      A: Skin bounces off of the diamond’s riding over the bumps, but hard materials can not bounce so they get cut.

      Q: What is the difference between a Ring Saw and a band saw?

      A: Ring Saw’s spin in a perfect circle and cut in all directions. Band saws travel in an ellipse, can cut basically forward like a polliwog travels.

      Q: What is the difference between a Ring Saw and a reciprocating saw?

      A: Ring Saws cut while spinning in a perfect circle, so there is little or no vibration while cutting. Jig saws vibrate cut on the up stroke causing delicate pieces to break and wear out much more quickly than Ring Saws.

      Q: Do I have to use water with my Ring Saw?

      A: Always use water.

      Q: When should I replace my wear parts?

      A: The average life of the drive belt is two to three blades.

      The Revolution blades are very similar to the solid 10″ diameter blades you will find on most wet saws. The difference is that our blades have no center, giving you the ability to not only cut straight lines but also make tight radius cuts. Because we run our blades at a much slower R.P.M. than the average wet saw but with far more torque, they give the user a much higher quality cut with far less chipping and in some cases superior blade life.

    .

    5226 QEP 24in Bridge Tile Saw Model 83200 by QEP

    5226 QEP 24in Bridge Tile Saw Model 83200
    Check Price for 5226 QEP 24in Bridge Tile Saw Model 83200

    QEP 24″ Wet Tile Bridge Saw

    Value-driven, dependable bridge saw is ideal for cutting large format pieces of tile, marble, granite and stone and offers the features usually found in saws that are as much as twice the price.

    • Free rear wheel attachment for easy transport, laser cutting guide, 8″ diamond blade, folding stand, & water pump
    • Rip cuts tile 24″ square, 18″ diagonal
    • Powerful 1.5 hp, 9.2 Amps, 3550 Rpm motor
    • Laser cutting guide
    • Motor trolley unit rides on 6 ball bearings for improved cutting
    • Weighs 106 lbs.
    • Size: 37″ L x 18″ W x 47″ H (w/ legs)
    • Fold–out stand with rear wheels.
    • 8″ blade with standard 5/8″ arbor

    .

    3121K MK-101 PRO24 Tile Wet Saw W/Stand by MK

    3121K MK-101 PRO24 Tile Wet Saw W/Stand
    Check Price for 3121K MK-101 PRO24 Tile Wet Saw W/Stand

    MK-101Pro 24 Series Features

    • Free shipping from MK factory warehouse to lower 48 states
    • We will charge applicable sales tax, for a factory direct drop-ship of the MK-101Pro 24 Tile Wet Saw In the state of California
    • Free 10″ MK-225 Hot Dog premium porcelain diamond blade, side extension table, water pump, stand w/ wheels, rip guide, large miter guide, dressing stone, adjustable protractor, and dual angle guide.
    • High torque belt driven 115V/60Hz 2 HP motor
    • 24″ rip cut capacity. 18″ x 18″ diagonal cuts
    • Weighs 108 lbs
    • Depth of cut (10″ Blade): 3-3/4″
    • Dimensions: 41″ x 21.5″ x 22.5″
    • Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
    • Multi-position motor post and cutting head for convenient cutting of various tile sizes
    • Built-in water distribution system supplies water to both sides of blade
    • Variable height cutting head allows for plunge cuts and use of blades smaller than 10″ in diameter
    • Accommodates 6″‘ and 8″ profile wheels
    • Blade shaft lock for easy blade removal
    • Cast aluminum blade guard and motor post
    • One-piece reinforced zinc-plated steel frame
    • One-year limited warranty

    .

    30351 MK-770EXP Wet Tile Saw by MK

    30351 MK-770EXP Wet Tile Saw
    Check Price for 30351 MK-770EXP Wet Tile Saw

    MK-770 EXP Tile Saw

    • Free shipping from MK warehouse to lower 48 states;
    • We will charge applicable sales tax for a factory direct drop-ship in the state of California
    • Free 7″ Hot Dog™ porcelain blade
    • 115V/60Hz, 1-1/4hp motor
    • 20″ rip cut capacity. 14″ x 14″ diagonal cuts
    • Weighs 33 lbs
    • Depth of cut: 2″
    • Depth of Cut at 45°: 1-1/8″
    • Dimensions: 33″ x 19″ x 20″
    • Powerful high-torque universal motor with maintenance-free, self-lubricating pinion and gear-box assembly
    • Tilting head allows for precise 45º miter cuts
    • Variable height cutting head allows for plunge cutting
    • Sliding aluminum die-cast cutting table
    • 3/4″ diameter chrome-plated linear guide-bar system
    • Single piece zinc-plated steel frame for rigidity, strength, and durability
    • Heavy duty on/off switch
    • Built-in water pump receptacle
    • Removable thermoplastic water reservoir
    • MK-Safeswitch™ prevents saw from being operated when locking key is removed
    • One-year limited warranty

    .

    30371K MK-101 PRO Wet Tile Saw W/Stand by MK

    30371K MK-101 PRO Wet Tile Saw W/Stand
    Check Price for 30371K MK-101 PRO Wet Tile Saw W/Stand

    MK-101Pro Tile Wet Saw Series Features

  • Free shipping from MK factory warehouse to lower 48 states
  • We will charge applicable sales tax, for a factory direct drop-ship of the MK-101Pro Tile Wet Saw In the state of California
  • Free 10″ MK-225 Hot Dog premium porcelain diamond blade, side extension table, water pump, stand w/ wheels, rip guide, large miter guide, dressing stone, adjustable protractor, and dual angle guide.
    • Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
    • Multi-position motor post and cutting head for convenient cutting of various tile sizes
    • Built-in water distribution system supplies water to both sides of blade
    • Variable height cutting head allows for plunge cuts and use of blades smaller than 10″ in diameter
    • Accommodates 6″‘ and 8″ profile wheels
    • One-year limited warranty

    .

    Recent Entries »